<------------------------------------- The Light Bulb Vaporizer ------------------------------------> [By: egregius 2004] DOCUMENT DISCLAIMER: The information contained in this document is intended for educational purposes only. The author has no responsibility in any form for use of this document in any way. Use this document at your own personal risk only. Use of this document violates your local, state, and federal laws in the United States of America. Readers located in counties besides America should investigate your nations laws before using any information contained in this document. Use at personal risk of violating the law. <----------------------------------------------------------------------------------------------------------> ABOUT VAPORIZORS AND VAPORIZATION: A light bulb vaporizer is a light bulb with the end broken off, cleaned out and a straw sized tube. The user puts the substance in the bulb applies a flame to the top of the glass end of the bulb, and inhales the vapors let off by the heated substance through the end you screw in, through the tube. Most drugs including marijuana, methamphetamine, free-based cocaine, opium, heroin, DMT, foxy, MDMA, and most everything else can be vaporized using this method. Vaporizing produces a rush because the substance hits the brain faster then injection. (Less then a second) That’s why some people may risk becoming addicted with some substances. Some people’s minds just are more likely to addict when the drug is inhaled. But in most cases vaporization is much better then smoking it because you don’t burn the substance. Plus you don’t get the byproducts of the combustion of the substance. In the case of marijuana you can get up to 95% of the THC in the weed. When you vaporize weed the THC vaporizes at a lower temperature then the other chemicals and contents of the plant. Therefore you can inhale 95% of the desired chemical, without any of the unwanted byproducts of combustion nor the chemicals it contains. Cancer and AIDS patients often choose this method because of the reduction of unwanted poisons and chemicals. The main advantages to this are the amount of weed it takes to get high. You can get stoned off an extremely lesser amount then smoking it. The high is slightly different. More clear-headed, and calm. Also vaporizing produces very little odor. You can smoke with people who disapprove in the house. I suggest a little cover-up smell, and that will cover the small amount of pot odor. To vaporize hold the bulb about 5/6ths of an inch over a flame, so the bulb doesn’t get black. Hold the flame right above the substance in the bulb. When you see a white vapor filling the bulb take a hit. You might leave the flame on the shit if you want to keep it vaporizing for a bigger hit, but remember it will keep vaporizing after you take it off the flame, until the temperature cools below it’s boiling point. You might want to shake the substance around so it evenly cooks. Some chemicals you might want to use “rock” or chunks of it, so it stays together inside the bulb, and is easier to cook. Meth is an example of this. With weed, break it up so all the pieces are small, and around the same size. This will help it cook faster, and evenly. You can usually tell when the substance is gone. With pot the shit is brown, and the hits taste like burning weed. At this point dump the spent pot, but you can smoke it and get further effects. With other substances you can taste it, and tell by its appearance. Remember you are also inhaling the contents of the substance other then the desired chemical. This may pose a health hazard. Some people may have undesired effects from vaporizing drugs. I’ve herd of vaporizing math causing first-timers to freak out, and have heart problems. So keep the possibilities in mind. HOW TO MAKE A VAPORIZOR: Supplies: 1. Light bulb. 2. Tube 3. Strong cleaner for inside of bulb. 4. Pliers, or something to grip and break off the metal end. 5. Substance for vaporization. Procedure: 1. Choose a light bulb. Anyone that you can break the bottom off of, and see throught it will work. Frosted bulbs will work, if you are able to clean the internal coating off. Some won’t come off. I suggest using the round small 25 watt bulbs. They the just the right size and the metal end breaks clean off, perfect. If you want portability, choose small bulbs like car break lights. 2. Using piers or something similar, grip the metal end close to the bulb, and ease pressure on it. You want to break it as clean off as possible. 3. Clean the bulb inside and out. Make sure you get the internal clean because of coatings and frostings. 4. You need a tube, the best is a bic-type pen. Take out the guts. You need a plastic tube and not a straw because the heat applied to the bulb will melt a straw first use. A pen tube will last forever. Continued use of the same tube will yield build up of the substance in the inner walls of the tube. This can be re-vaporized. 5. Use the shit. Some people may need something to hold the bulb due to heat. After much use the shit will buildup on the sides of the bulb. You can vaporize it, but with weed you will need to clean it often. The bulb becomes yellow, and the black weed sticks to it. When this happens you can’t see the vapor to inhale it. For the best vaporizer use the round-small 25 watt clear bulbs, with a bic-style pen tube that has a finger grip. The end will break off clean, and you insert the finger-grip end into the bulb. The grip will hold it in place, and it works perfect. Remember not to grab the hot bulb. Any bulb will burn out after much use. The inside will become too covered in spent shit. Then you need to find a new one. Enjoy this basic addict information! <----------------------------------------------------------------------------------------------> The following document was written by egregious. E-mail me @: counterprogram@hotmail.com FUCK THE WORLD!